Ricoh Pro C5300S - Copying Onto Envelopes; Copying Onto Envelopes from the Bypass Tray

Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on
the exposure glass and place the envelope in the bypass tray, paper trays, or the wide LCT.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see page 241 "Recommended Paper Sizes and Types".
About handling envelopes, supported envelope types, and how to load envelopes, see page 277
"Envelope Orientation and Recommended Status".
• The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1
sided 2 sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal
and vertical length of the envelope.
D0CPIC0421
: Horizontal
: Vertical
Be sure to include the fully open flap in the horizontal dimension.
Copying onto envelopes from the bypass tray
1. Load the envelope in the bypass tray.
The bypass tray (
) is automatically selected.
2. Press [
].
Copying onto Envelopes
107