1. Press [Finishing].
2. Press [Finisher].
3. Select [Sort] or [Rotate Sort], and then press [OK].
4. Enter the number of copy sets using the number keys.
5. Place the originals.
To confirm the type of finishing, press [Sample Copy].
6. Press [Start].
• If you are copying from the exposure glass, a single copy of each original is made first. If the first
copy set is acceptable, you can make the remaining copy sets by pressing [ ]. The time required
for copy sets to be delivered varies depending on the print settings.
• Paper sizes and orientations that can be used in the Rotate Sort function are as follows:
• A4 , A5 , B5 JIS , 8
1
/
2
× 11 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, C5 Env ,
16K , SRA4 , 226 × 310 mm
• When using the Rotate Sort function, the capacity may be reduced.
• When the number of copies exceeds capacity, copying stops. If this happens, remove copies from
the tray to resume copying.
• The number of sheets that can be placed in output trays, see the following section:
• page 491 "List of Specifications for External Options"
2. Copy
110
To Next Page
Loading...
