• USB: Following the instructions on the [Connection with device] screen, connect the machine
and the computer with the USB cable to search for the machine.
8. Select this machine from among the detected devices, and then click [Next].
The installation of the driver starts.
• If "Could not verify publisher" is displayed at the beginning of installation, continue the
installation. There is no problem with the started installer that is downloaded from the
manufacturer's website. Continue the installation.
• When you connect the machine and the computer with a USB cable, follow the instructions on
the installer screen.
If the machine is not detected, click [Cancel Connection]. Even if the connection is canceled,
the installation is complete. After the installer screen is closed, the machine is added
automatically when it is connected to the computer with the USB cable.
Installing the Printer Driver by Using Device Software Manager Installer
127
To Next Page
Loading...
