No. Option Description
2
Booklet Finisher
SR5120
Sorts, stacks, and staples multiple sheets of paper. The saddle
stitch function can staple multiple sheets of paper in the center
and fold them into booklets. Consists of the following paper
trays:
• Finisher shift tray 1
• Finisher shift tray 2
• Finisher booklet tray
Prints can be punched if the optional punch unit is installed on
the finisher.
Depending on when the machine was bought, this option may
not be available. For details, contact your service
representative.
3 Trimmer unit
Cuts the fore edge of the book block after the book block is
saddle stitched.
Booklet Finisher SR5120 is required in order to attach this.
Depending on when the machine was bought, this option may
not be available. For details, contact your service
representative.
4 Finisher SR5110
Sorts, stacks, and staples multiple sheets of paper. Consists of
the following paper trays:
• Finisher shift tray 1
• Finisher shift tray 2
Prints can be punched if the optional punch unit is installed on
the finisher.
Depending on when the machine was bought, this option may
not be available. For details, contact your service
representative.
5 Finisher bridge unit
This option is required for connecting another manufacturer's
finisher.
6 High capacity stacker
Consists of the following paper trays:
• Stacker upper tray
• Stacker tray
The stacker upper tray can hold up to 250 sheets of paper, and
stacker tray can hold up to 5,000 sheets of paper.
1. Getting Started
34
To Next Page
Loading...
