Message Cause Solution and reference
"An error occurred
while printing a job
with Background
Numbering. The job
has been
cancelled."
A size that is
impossible to print
was specified.
Specify a size smaller than 215.9 mm (8.5 inches) wide
and 355.6 mm (14.0 inches) long in "Print On:" in the
printer driver. When [Same as Original Size] is
specified in "Print On:", reduce the size specified in
"Print On:" or adjust the size in the application.
"An error occurred
while processing an
Unauthorized Copy
Prevention job. The
job was cancelled."
The settings in the
printer driver are
incorrect.
Check the following in the printer driver:
• Is a value smaller than 600 dpi specified in
[Resolution]?
See "Applying Different Print Settings Depending
on the Document Type", User Guide.
• Is only space(s) entered as the text to use for the
background pattern in the unauthorized copy
prevention function?
• Is Document Server specified as the print method?
See "Storing Documents to Print in the Machine",
User Guide.
Unauthorized copy
prevention is given
priority in [Settings
for Administrator].
Consult the device administrator for the settings of the
machine. The machine administrator can change the
setting in [Settings] [System Settings] [Settings for
Administrator] [Security Pattern/Stamp]
[Unauthorized Copy Prevention Printing: Printer].
See "Data Management/Maintenance", User Guide.
"Auto-registration of
user information has
failed."
The maximum
number of items that
can be registered
has been exceeded
and the
authentication
information for
LDAP authentication
or Windows
authentication
cannot be
registered
automatically.
Delete a user that is no longer necessary from the
address book.
When a Message Appears While Using the Printer Function
393
To Next Page
Loading...
