Ricoh Pro C5300S - Page 410

Message Cause Solution and reference
"EC: The job was
cancelled because of a
failure to store and skip
an error job."
A document has been set to
be stored or canceled when
an error occurs and it did
not operate, so printing was
canceled by the auto job
cancel function.
• Fix the error that occurred.
• You can check the settings of the
operation when an error occurs in
[Settings] [Printer Settings]
[System] [Error Action] [Store
and Skip Errored Job].
"ED: The specified paper
size is not valid for 2
sided print and therefore
Magazine finishing is not
available. The job was
cancelled."
A paper size that cannot be
used for 2 sided print was
specified and [Magazine]
finishing was not available,
so printing was canceled by
the auto job cancel function.
When specifying [Magazine], check and
specify the paper size that corresponds to
2 sided print.
page 491 "List of Specifications for
External Options"
"EE: There are mixed
paper sizes therefore
Magazine finishing is not
available. The job was
cancelled."
Two or more paper sizes
were used and [Magazine]
finishing was not available,
so printing was cancelled
by the auto job cancel
function.
When specifying [Magazine], use sheets of
the same size.
"EF: The job was
cancelled because the
specified paper size is
not valid for 2 sided
print."
A paper size that is not valid
for 2 sided print was
specified, so printing was
cancelled by the auto job
cancel function.
Check the paper size that corresponds to 2
sided print.
page 491 "List of Specifications for
External Options"
"EG: The job was
cancelled because the
specified paper type is
not valid for 2 sided
print."
A paper type that is not
valid for 2 sided print was
specified, so printing was
canceled by the auto job
cancel function.
Check the paper weight that corresponds
to 2 sided print.
page 491 "List of Specifications for
External Options"
11. Troubleshooting
408