Items to check Solution if applicable
Is the bypass tray used
correctly?
• Set the machine in a location where the bypass tray and the
loaded paper do not come in contact with the wall.
• Adjust the left and right paper guides to the paper size and lock
them.
• When loading paper that is larger than A4 or 8
1
/
2
× 11 ,
pull out the extender.
• Also check the basic procedure for loading paper into the machine again.
page 197 "Loading Paper into the Paper Tray"
Tray Paper Settings
Items to check Solution if applicable
Do the paper size and
the setting in [Tray Paper
Settings] match?
• Specify a setting that matches the loaded paper in "Paper Size".
Press [Home] ( ) after specifying the settings.
• When [Auto Detect] is specified, check that the loaded paper is
supported by the auto detect function.
page 241 "Recommended Paper Sizes and Types"
• Check the paper that can be loaded in the machine again.
page 241 "Recommended Paper Sizes and Types"
11. Troubleshooting
456
To Next Page
Loading...
