Ricoh SP C360 series User Manual

8. Adding Paper and Toner
This chapter describes how to load paper into the paper tray and recommended paper sizes and types.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and operations required after paper is loaded.
After following the procedures below, you can copy or print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
DSG260
For details about the procedures, refer to the next page.
Procedure Reference
See page 102 "Loading Paper".
When loading envelopes, see page 112 "Loading Envelopes".
See "Changing the Paper Size", Paper Specifications and Adding Paper.
For PCL and PostScript 3 printer drivers for windows, see Print.
For PS3 printer driver for Mac OS X and macOS, see PostScript 3.
For details about recommended paper, see page 124 "Supported Paper".
101

Ricoh SP C360 series Specifications

General

Duplex Printing	Yes
AirPrint Enabled	Yes
Max Printing Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Max Document Enlargement	400%
Max Document Reduction	25%
Bypass Tray Capacity	100 sheets
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing Capability	Yes
Original Size	A4
Media Type	Plain paper, envelopes, labels
Media Sizes	A4, A5, B5, Letter, Legal, Executive, Folio
Functions	Print, copy, scan
Operating System Compatibility	Windows, macOS