Ricoh SP C360 series User Manual

If the network does not allow automatic obtaining of IP addresses, include the destination
computer's IP address in the path. For example: if the IP address of the destination computer is
"192.168.0.191", and the folder name is "Share", the path will be \\192.168.0.191\Share.
3. Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit], and then enter the
path again.
Locating the SMB folder using Browse Network
1. Press [Browse Network].
The client computers sharing the same network as the machine appear.
Network display only lists client computers you are authorized to access.
2. Select the group that contains the destination computer.
3. Select the computer name of the destination computer.
Shared folders under it appear.
You can press [Up One Level] to switch between levels.
4. Select the folder you want to register.
5. Press [OK].
Deleting an SMB Registered Folder
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [Address Book Management] icon.
3. Press [Change].
4. Press [Folder].
5. Select the name whose folder you want to delete.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-
Fax destination.
Preparation for Sending by Scan to Folder
87

Ricoh SP C360 series Specifications

General

Duplex Printing	Yes
AirPrint Enabled	Yes
Max Printing Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Max Document Enlargement	400%
Max Document Reduction	25%
Bypass Tray Capacity	100 sheets
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing Capability	Yes
Original Size	A4
Media Type	Plain paper, envelopes, labels
Media Sizes	A4, A5, B5, Letter, Legal, Executive, Folio
Functions	Print, copy, scan
Operating System Compatibility	Windows, macOS