Ricoh SP C360 series User Manual

Turning On/Off the Power
• When you push the main power switch, wait at least 10 seconds after it is confirmed that the main
power indicator has lit up or gone out.
The main power switch is on the front side of the machine. When this switch is turned on, the main power
turns on and the main power indicator on the right side of the control panel lights up. When this switch is
turned off, the main power turns off and the main power indicator on the right side of the control panel
goes out. When this is done, machine power is off.
Turning on the main power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Push the main power switch.
The main power indicator goes on.
DUP123
Turning off the main power
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Do not turn off the power while the machine is in operation.
• Do not hold down the main power switch while turning off the main power. Doing so forcibly turns
off the machine's power and may damage the memory and cause malfunctions.
2. Getting Started
50

Ricoh SP C360 series Specifications

General

Duplex Printing	Yes
AirPrint Enabled	Yes
Max Printing Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Max Document Enlargement	400%
Max Document Reduction	25%
Bypass Tray Capacity	100 sheets
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing Capability	Yes
Original Size	A4
Media Type	Plain paper, envelopes, labels
Media Sizes	A4, A5, B5, Letter, Legal, Executive, Folio
Functions	Print, copy, scan
Operating System Compatibility	Windows, macOS