Ricoh SP C360 series - Loading Orientation-Fixed Paper or Two-Sided Paper

2. Slide both sides of the paper guide outward, and then load paper print side down until it
stops.
1
1
2
DUP056
3. Adjust both sides of the paper guide to match the paper width.
DUP057
• When using the bypass tray, it is recommended that you set the paper direction to .
• Letterhead paper must be loaded in a specific orientation. For details, see page 109 "Loading
Orientation-fixed Paper or Two-sided Paper".
• You can load envelopes into the bypass tray. For details, see "Loading Envelopes", Paper
Specifications and Adding Paper.
• When copying from the bypass tray, see "Copying from the Bypass Tray", Copy.
• When the [Notification Sound] is set to [No Sound], it does not sound if you load paper into the
bypass tray. For details about [Notification Sound], see "DEVICE", Connecting the Machine/
System Settings.
Loading Orientation-fixed Paper or Two-sided Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or
copied paper) might not be printed correctly, depending on how the originals and paper are placed.
Loading Paper
109