Ricoh SP C360 series - Registering Functions in a Program

Registering Functions in a Program
Depending on the functions, the number of programs that can be registered is different.
Standard Applications
• Copy: 25 programs
• Fax: 100 programs (for SP C360SFNw/C361SFNw)
• Scanner: 100 programs
Quick Applications
• Quick Copy: 25 programs
• Quick Fax: 100 programs (for SP C360SFNw/C361SFNw)
• Quick Scanner: 100 programs
The following settings can be registered to programs:
Standard Applications
Copy:
Reduce/Enlarge, Quantity, Density, Paper Tray, 2 Sided, Combine, Sort, Original Size,
Original Type, Other Settings
Fax (for SP C360SFNw/C361SFNw):
Destination, Settings
Scanner:
Destination, Send Settings
Quick Applications
Quick Copy:
Density, Paper Tray, Quantity, Reduce/Enlarge, 2 Sided, Combine, Original Orientation
Quick Fax (for SP C360SFNw/C361SFNw):
Destination, Line, Density, Resolution, Original Orientation, Original Sides, Scan Size,
Original Type
Quick Scanner:
Destination, Original Type, File Type, Resolution, Original Orientation, Original Sides, Scan
Size
This section explains how to register functions to a program by using each application.
1. Edit the settings so all functions you want to register to a program are selected on the
[Copy], [Fax], [Scanner], [Quick Copy], [Quick Fax], or [Quick Scanner] screen.
2. Press [Menu] ( ) at the bottom of the screen in the center.
3. Press [Reg. Current Setting to Program].
2. Getting Started
48