Combined Copying
This mode can be used to select a reproduction ratio automatically and copy two originals onto a single
sheet of copy paper.
The machine selects a reproduction ratio between 25 and 400%. If the orientation of the original is
different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to
make copies properly.
Orientation of the original and image position of Combine
The image position of Combine differs according to original orientation and the number of originals
to be combined.
• Portrait ( ) originals
• Landscape ( ) originals
Placing originals (originals placed in the ADF)
The copy order in the Combine function is "from left to right". To copy originals from right to left in
the ADF, place them upside down.
• Originals read from left to right
• Originals read from right to left
Combined Copying
61
To Next Page
Loading...
