Ricoh SP C360 series User Manual

Energy efficiency
The amount of electricity a machine consumes depends as much on its specifications as it does on
the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
Ready mode after it prints the last page. If required, it can immediately print again from this mode.
If no additional prints are required and a specified period of time passes, the device switches to an
energy saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
a little longer to return from an energy saving mode than from Ready mode.
For maximum energy savings, we recommend that the default setting for power management is
used.
Products that comply with the Energy Star requirement are always energy efficient.
Notes to users in the state of California (Notes to Users in USA)
(mainly North America)
Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
Information on Environmental Regulations
197

Ricoh SP C360 series Specifications

General

Duplex Printing	Yes
AirPrint Enabled	Yes
Max Printing Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Max Document Enlargement	400%
Max Document Reduction	25%
Bypass Tray Capacity	100 sheets
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing Capability	Yes
Original Size	A4
Media Type	Plain paper, envelopes, labels
Media Sizes	A4, A5, B5, Letter, Legal, Executive, Folio
Functions	Print, copy, scan
Operating System Compatibility	Windows, macOS