Ricoh SP C360 series - Printing from the Bypass Tray Using the Printer Function

5. Select the loaded paper size, and then press [OK].
6. Press [User Tools] ( ).
7. Press [Home] ( ) at the bottom of the screen in the center.
• For details about the available paper size, see page 124 "Supported Paper Sizes and Types".
Printing from the Bypass Tray Using the Printer Function
• If you select [Machine Setting(s)] or [Machine Setting(s): Any Type] in [Bypass Tray] under [Tray
Setting Priority] in [System] of the Printer Features menu, the settings made using the control panel
have priority over the printer driver settings. For details, see "System", Print.
• The default of [Bypass Tray] is [Machine Setting(s): Any Type].
• Settings remain valid until they are changed.
• For details about setting printer drivers, see "Standard Printing", Print.
• (mainly Europe and Asia)
[A4 ] is the default setting for [Printer Bypass Paper Size].
• (mainly North America)
[8
1
/
2
× 11 ] is the default setting for [Printer Bypass Paper Size].
Specifying regular sizes using the control panel
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Tray Paper Settings].
4. Press [Printer Bypass Paper Size].
Changing the Paper Size
121