5. Print
This chapter describes frequently used printer functions and operations. For information not included in
this chapter, see Print available on our website.
Quick Installation
This section explains how to install the PCL 6 printer driver and configure the settings to use the printer
via a network or USB connection easily.
Quick Installation via a Network
Quick installation via a network allows you to install the PCL 6 printer driver via a network connection
and configure the settings to use the printer in a network.
1. Click [Install from Disk] on the installer screen.
2. Click [Network Printer(s)] on the installer screen.
3. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next >].
4. Click [Next >].
5. Select the machine model you want to use in the [Select Printer] dialog box.
6. Click [Install].
7. When the port setting screen appears, specify a port.
8. Configure the user code, default printer, and shared printer as necessary.
9. Click [Continue].
The installation starts.
10. Click [Finish].
When you are prompted to restart your computer, restart it by following the instructions that
appear.
11. Click [Exit] in the first window of the installer, and then remove the CD-ROM.
Quick Installation via a USB Connection
Quick installation via a USB connection allows you to install the PCL 6 printer driver via a USB
connection and configure the settings to connect the printer to a computer.
1. Click [Install from Disk] on the installer screen.
2. Click [USB Printer(s)] on the installer screen.
75
To Next Page
Loading...
Need help?
General
