Settings for the User Tools
• Copier mode
Specify [Yes] for [Letterhead Setting] in [Input/Output] under the Copier Features menu, and
then place the original and paper as shown below.
• Printer mode
Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer
Features menu, and then place the paper as shown below.
For details about the letterhead settings, see "Input/Output", Copy, or "System", Print.
Original orientation and paper orientation
The meanings of the icons are as follows:
Icon Meaning
Place or load paper scanned or printed side face up.
Place or load paper scanned or printed side face down.
• Original orientation
Place the originals as shown below.
Original orientation
Exposure glass/ID Card
Feeder
ADF
Readable orientation
90 Degrees
Counterclockwise
• Paper orientation
• Copier mode
8. Adding Paper and Toner
110
To Next Page
Loading...
