No. Function Description
5 Reset Press to clear your current settings.
6 Current Settings You can check the settings in [Send Settings].
7 Send Settings Press to open the send settings screen.
8 Start Press to scan originals and start sending.
9 Display Tab Switch Press to switch the section of the Address Book.
10 Destination keys
Shows the destinations in the Address Book.
If a password or protection code is specified to a folder
destination, enter the password or protection code on the screen
displayed after tapping the folder destination.
11 Address Tab
Press the title word key where the desired destination is
programmed.
For example, if you want to specify "New York Office", press
[LMN].
12 Add Destination
Press to add a destination.
Destinations can be added as follows:
• Input destinations manually
• Specify a registration number from the Address Book
• Search for a destination in the Address Book or on the LDAP
server
• If you specify many destinations, the machine might require some time to start scanning originals
after [Start] is pressed.
2. Getting Started
44
To Next Page
Loading...
