Roche URISYS 2400 - Page 38

Roche Diagnostics
B-14 Operator’s Manual · Version 1.0
3 Software URISYS 2400
Installation
Immediately below the line indicating the status of the analyzer, the name of
the current screen is displayed. For example, the name of the screen displayed
above is [Routine Monitor].
There are a number of buttons that consistently appear on the screens. The
following table summarizes these buttons and their functions.
Figure B-6 on page B-13
Press <Home> on the initial [Copyright] screen to display the [Routine Monitor]
screen.
Button Explanation
<Home> Press this button to display the [Routine Monitor] screen.
<Alarm> This button flashes to signal an alarm. Press this button to
read the message.
<Menu> Press this button to display the [Menu] screen.
<PgUp> Page up. Press this button to return to the previous screen.
<CLR> The data entered is cleared. The CLR button only works
before the Enter button is pressed.
<Cancel> Cancels any data that has been entered and returns to the
previous screen without having made any changes. The
Cancel button only works before the Enter button is pressed.
<OK> Confirms the data on-screen and proceeds to the next
screen.
“<“ Press < to move through the different fields.
“>“ Press > to move through the different fields.
<+> Increases values on the touch screen.
<-> Decreases values on the touch screen.
<>
Enter. Press this button to confirm the newly entered data.
Table B-3 Main buttons displayed on the touch screen