Roche Diagnostics
C-22 Operator’s Manual · Version 1.0
5 Daily operation URISYS 2400
Analysis and documentation of results
Display the result data The operator can access result data in the same way for all sample types.
a To display the result data
1 Press <Menu> on the [Routine Monitor] screen. The [Menu] screen is
displayed.
2 Press <Data Monitor>. The [Data Monitor] screen is displayed.
3 Press <Routine Data Monitor>. The [Routine Data Monitor] screen is
displayed.
The result of the most recently tested routine sample is displayed.
4 Press <Prev> to display the results of previously tested samples.
5 Press <Type> to toggle between the most recent routine and STAT sample
result.
Search sample data Use the sequence number (Seq. No.) or the sample ID number (ID) to search
for data for routine and STAT samples. The result data can be searched at any
analyzer status – Operation, Sampling Stop, or Stand-By.
Figure C-6 on page C-22
Figure C-6 Routine Data Monitor screen
Results cannot be retrieved using rack number, position number, date and time, or
operator ID.
To Next Page
Loading...
