Roche URISYS 2400 - 5 Daily Operation

Roche Diagnostics
Operator’s Manual · Version 1.0 C-1
URISYS 2400 5 Daily operation
Table of contents
Daily operation
This chapter describes daily operation for the URISYS 2400.
Initial preparations .............................................................................................3
System start ........................................................................................................4
Start conditions before sampling .................................................................5
Sample preparation .........................................................................................8
Preparation of sample racks and tubes .......................................................8
Loading the rack(s) onto the analyzer ..........................................................9
Start analysis of samples .............................................................................10
Termination of analysis ...................................................................................11
Completion of analysis ................................................................................11
Interrupting analysis ...................................................................................11
Automatic termination ...............................................................................12
Termination due to an alarm .....................................................................12
Remove processed samples ..............................................................................12
Process additional samples ...............................................................................13
Process STAT (emergency) samples ...............................................................14
During routine sampling ............................................................................14
After interruption or completion of routine sampling .............................16
Start from Stand-By status ..........................................................................16
Process control samples ...................................................................................17
Replace an empty URISYS 2400 cassette ........................................................18
Replace an expired URISYS 2400 cassette .......................................................19
Re-insert a used URISYS 2400 cassette ............................................................20
In this chapter C
Chapter
5