Roche Diagnostics
Operator’s Manual · Version 1.0 C-25
URISYS 2400 5 Daily operation
Analysis and documentation of results
7 Press <Stop> to terminate printing at any time.
Presentation of results
on the printout
The operator can specify the print order of the test parameters on the
printout, and the number of samples to be printed on each page.
The printout includes the following:
o Headline
o Date and time of the printout
o The sequence number of the sample (with a leading N for routine samples
or E for STAT samples)
o Rack number and the position of the sample in the rack
o Sample ID (whether read by the barcode reader or entered by the
operator)
o Operator ID
o Date and time of measurement
o Test parameter results
o Flags
To print sample data, the analyzer must be in Stand-By status.
“Print order” on page B-18
“To set the print order” on page B-19
Table E-1 on page E-2
Urisys 2400 Analytical Report 2001.04.02 09:59
S.No.N0123 RACK 50019-1 ID 1015 OP2 2001.04.02 09:58
SG 1.002 PH 7 * LEU 25 /µL S
* NIT POS S * PRO 75 mg/dL S * GLU 50 mg/dL
KET NEG * UBG 1 mg/dL * BIL 1 mg/dL
ERY NEG COL AMBER CLA CLEAR
S.No.E007 ID OP2 2001.04.02 10:22
SG 1.002 PH 7 * LEU 25 /µL S
* NIT POS S * PRO 150 mg/dL S GLU NORM
KET NEG UBG NORM BIL NEG
ERY NEG COL AMBER CLA CLEAR
Figure C-7 Example of routine sample and STAT sample printouts
To Next Page
Loading...
