Roche Diagnostics
Operator’s Manual · Version 1.0 B-9
URISYS 2400 2 Hardware
Installation
5 Close the strip waste container door.
External printer
An external printer can be connected via a standard parallel interface
(Centronics type).
Recommended printers are:
If another type of printer is used, ensure that it is compatible with the
analyzer.
External host connection
The analyzer can be connected to a host computer via a serial interface using
ASTM protocol.
Figure B-5 Installing the strip waste container
Country Printer
For Japan: EPSON VP600
FUJITSU M3388C
For Europe: FUJITSU M3388B
FUJITSU DL 3700 Pro
For USA: FUJITSU M3388A
Table B-1 Table of recommended printers
For specifications of serial host interfacing, contact Technical Support.
To Next Page
Loading...
