Rohde & Schwarz SME02 - Radiocommunication Service FLEX

SME Digital Modulation
1038.6002.02 2.107 E-13
2.6.3.12 Radiocommunication Service FLEX
Like ERMES, FLEX is a radiocommunication service that makes for convenient paging. When
equipped with the SME-B41 (FLEX), SME-B11 (DM coder) and SME B12 (DM memory extension)
options, the SME generates call signals complying to the FLEX or FLEX-TD standard. All essential
parameters and the message to be transmitted are freely selectable.
FLEX settings can be accessed via the DIGITAL-MOD- FLEX menu:
FREQUENCY
LEVEL
MODULATION
DIGITAL MOD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
HELP
GMSK
GFSK
QPSK
FSK
4FSK
FFSK
ERMES
FLEX
FREQ
100. 000 000 0
MHz
LEVEL dBm
STATE
OFF ON
MODULATION 1600-2 FSK
DEVIATION 4.8 kHz
---------------SYSTEM INFORMATION---------------
SYSTEM COLLAPSE VALUE 4
FRAME OFFSET 1
ROAMING OFF NID SSID ALL
SSID
LOCAL ID 0
COVERAGE ZONE 0
COUNTRY CODE 262
SSID TMF 15
NID
NETWORK ADDRESS 2058240
MULTIPLIER 1
SERVICE AREA 0
NID TMF 15
DATE 1994/01/01
TIME 12:00
--------------------MESSAGE---------------------
CAPCODE A0000001
AUTO ADJUST NONE PHASE FRAME BOTH
PHASE A
CATEGORY TONE
REPEATS 0
TONE NUMBER 0
NUMERIC/SNUMERIC MESSAGE... 0123456789
ALPHANUM MESSAGE CURRENT: USER3
EDIT MESSAGE
SECURE MESSAGE CURRENT: USER3
TYPE ASCII BIN USER RESERVED
BINARY MESSAGE CURRENT: USER1
EDIT MESSAGE
DISPLAY DIRECTION LEFT RIGHT
BLOCKING LENGTH 1
MESSAGE NUMBERING OFF ON
MAIL DROP FLAG OFF ON
--------------------BIT ERRORS-------------------
ERROR BIT MASK 0
POSITION OF ERRONEOUS WORD 0
---------------MESSAGE GENERATION----------------
START IN CYCLE 0
START IN FRAME 0
FRAME CONTENTS...
RECALCULATE
MODE ALWAYS SINGLE EXT-SINGLE EXTTRIG EXTTRIG-ALWAYS
EXECUTE SINGLE
CLOCK SOURCE INT EXT
- 30.0
ext
Fig. 2-49 Menu DIGITAL MOD - FLEX, options SME-B41, SME-B11, SM-B12