Rohde & Schwarz SME02 - Source:reflex25 Subsystem

SME SOURce:REFLex25
1038.6002.02 3.93 E-13
3.6.11.18 SOURce:REFLex25 Subsystem
This subsystem contains the commands for setting the ReFLEX25 signal. The telegram generated by
the SME complies with the ReFLEX25 Protocol Specification Document Version 2.4 dated March 15,
1996, issued by the Motorola Advanced Messaging Group. ReFLEX25 can only be activated if the SME
is equipped with the SME-B43, SME-B11 and SME-B12 options.
Command Parameter Default
Unit
Remark
[:SOURce]
:REFLex25
:STATe
:AUTO
:MODulation
:DEViation
:MESSage
:PADDress
:ALPHanumeric
[:SELect]
:CATalog?
:DATA
:NUMeric
:RREQuired
:SI | SINFormation
:ZONE
:SZONe
:PROVider
:FCHannel
:BASE
:ANUMber
:RCHannel
:BASE
:ANUMber
:SPEed
:FSPacing
:SCIBase
:SCICollapse
:ERRor
:MASK
:WORD
:FCONtent
:AADaptation
:TACTion
ON | OFF
ON | OFF
1600, FSK2 | 3200,FSK2 | 3200,FSK4 | 6400,
FSK4
2.0 to 10.0 kHz
16777216 to 1073741823
“name“
“alphanumeric data“
“numeric data“
ON | OFF
0 to 4091
0 to 127
0 to 16383
0 to 8191MHz
0 to 2047
0 to 8191MHz
0 to 2047
800 | 1600 | 6400 | 9600 bps
0 to 102350 Hz
0 to 127
0 to 7
0 to 4294967295
0 to 351
“I|A|N|T|S|R|B|F|O|1|2|3|4|5|6|7|8|9
[,I|A|N|T|S|R|B|F|O|1|2|3|4|5|6|7|8|9]“
ON | OFF
MESSage | STARt | ONCE
Hz
Hz
Hz
bps
Hz
Options SME-B11,
SME-B12 and SME-
B43
query only