SME Status
1038.6002.02 2.169 E-13
2.12 The Help System
The SME has two help systems. On the one hand the context-sensitive help which is called by means of
the HELP key and which gives information on the current menu. On the other hand, auxiliary texts can
be selected according to headwords in alphabetical order by accessing menu HELP.
HELP Key
The yellow HELP key can be pressed at any point in time. The current setting menu is faded out and
context-sensitive text faded in. The help panel can be exited by means of the RETURN key.
Menu HELP
After calling the help menu, access to all auxiliary texts is possible via an index. Operation is analog to
menu operation.
À Set the menu cursor to the index desired using the shaft encoder.
À Press the [SELECT] key.
À The information for the index marked is displayed.
À Press the [RETURN] key to exit the menu.
2.13 Status
By means of a STATUS page, the SME permits an overview over all settings of the instrument. The
settings are displayed in an abbreviated form. The STATUS page is called by pressing the [STATUS]
key. Return to the preceding menu is effected using the [RETURN] key.
AM:OFF
FM1:DEV 123.00kHz; LFGEN1 AC
FM2:OFF / PM:OFF
PULSE:EXT DEL 1.00µs
WID 1.00µs
DM:OFF FM1 PULSE
LF1: 1kHz
LF2:1 000 0kHz; SIN
OUTPUT:OFF
SWEEP:OFF
REF OSC:10MHz INT
ALC BW: AUTO
TRIGGER SLOPE:NORM
LOCAL
UNLOCKED
FREQ
100. 000 000 0
MHz
FM1 PULSE
LEVEL
- 30.0
dBm
Fig. 2-80 Menu STATUS page
To Next Page
Loading...
