SME SOURce
1038.6002.02 3.29 E-133
3.6.11 SOURce-System
This system contains the commands to configure the RF signal source. Keyword SOURce is optional,
i.e., it can be omitted. The LF signal sources (options SM-B2 and SM-B6) are configured in the
SOURce0|2 system (cf. Section 3.6.12).
The following subsystems are realized in the instrument:
Subsystem Settings
[:SOURce]
:AM
:CORRection
:DM
:ERMes
:FLEX
:FM
:FREQuency
:ILS
:LIST
:MARKer
:MBE
:PHASe
:PM
:POCSag
:POWer
:PULM
:PULSe
:ROSCillator
:STEReo
:SWEep
:VOR
Amplitude modulation
Correction of the output level
Digital modulation
ERMES signal
FLEX signal
Frequency modulation
Frequencies including sweep
Test signals for ILS (Instrument Landing System)
LIST operating mode
Marker generation with sweeps
Marker signals (Marker Beacon)
Phase between output signal and reference oscillator signal
Phase modulation
Post O
ffice Code Standardisation Advisory Group)
Output level, level control and level correction
Pulse modulation
Pulse generator
Reference oscillator
Stereo modulation
Sweeps
Test signals for VOR (VHF Omnidirectional Range)
To Next Page
Loading...
