OUTPut SME
1038.6002.02 3.26 E-13
3.6.8 MEMory System
This system contains the commands for the memory management of the SME.
Command Parameter Default
Unit
Remark
:MEMory
:NSTates?
Query only
:MEMory:NSTates?
The command returns the number of *SAV/*RCL memories available. The SME has 50
*SAV/*RCL memories in total.
Example: :MEM:NST? Response: 50
3.6.9 OUTPut-System
This system contains the commands specifying the characteristics of the RF output socket and the
BLANk socket. The characteristics of the LF socket are specified in the OUTPut2 system.
Command Parameter Default
Unit
Remark
:OUTPut
:AMODe
:BLANk
:POLarity
:IMPedance?
:PROTection
:CLEar
:TRIPped?
[:STATe]
:PON
AUTO | FIXed
NORMal | INVerted
ON | OFF
OFF |UNCHanged
Query only
Query only
:OUTPut:AMODe AUTO | FIXed
The command switches over the operating mode of the attenuator at the RF output (Attenuator
MODe).
AUTO The attenuator is switched whenever possible.
FIXed The attenuator is switched when certain fixed levels are exceeded/fallen below.
Example: :OUTP:AMOD AUTO *RST value is AUTO
To Next Page
Loading...
