SME List Editor
1038.6002.02 E-13
2.29
FUNCTION
Selection of the edit function for processing the lists. The EDIT page is
automatically called through the selection (cf. Section 2.2.4.3).
FILL Filling a list with elements.
INSERT Insertion of elements into a list.
DELETE Deletion of elements of a list.
2.2.4.1 Select and Generate - SELECT LIST
SELECT LIST opens a selection window in which either an existing list can be selected or a new, empty
list can be generated (cf. Fig. 2-8). By pressing the [RETURN] key, the selection window is closed
without changing the setting.
Select list
À Mark the list desired using the rotary knob.
À Press [SELECT] key.
The selected list is included in the instrument setting. The selection window
is closed. The selected list is displayed under CURRENT.
Generate list
À Mark CREATE NEW LIST
➤
using rotary knob.
À Press [SELECT] key.
A new empty list is automatically generated which can be filled using
functions FILL or EDIT. The selection window is closed. The new list is
displayed under CURRENT.
No modification
of the setting
À Press [RETURN] key.
Selection: DELETE
FREQUENCY
LEVEL
MODULATION
DIGITAL MOD
LF OUTPUT
SWEEP
LIST
MEM SEQ
UTILITIES
HELP
LEVEL
- 30.0
100. 000 000 0
FREQ
MHz
dBm
MODE OFF AUTO SINGLE
EXECUTE SINGLE MODE
RESET
CURRENT INDEX
SELECT LIST...
DELETE LIST...
FUNCTION
CREATE NEW LIST
MSEQ1 199
MSEQ2 100
MSEQ3 1
MSEQ4 123
Fig. 2-8 SELECT-LIST-selection window
To Next Page
Loading...
