UNIT SME
1038.6002.02 3.129 E-13
3.6.17 UNIT-System
This system contains the commands specifying which units are valid if no unit is indicated in a
command. These settings are valid for the entire instrument.
Command Parameter Default
Unit
Remark
:UNIT
:ANGLe
:POWer
DEGRee| DEGree | RADian
DBM | DBW | DBMW | DBUW | DBV | DBMV | DBUV |
V
:UNIT:ANGLe DEGRee | DEGree | RADian
The command indicates the unit for angles. *RST value is RADian
Example: :UNIT:ANGL DEGR
:UNIT:POWer DBM | DBW | DBMW | DBUW | DBV | DBMV | DBUV | V
The command indicates the unit for power. *RST value is DBM
Example: :UNIT:POW V
To Next Page
Loading...
