SME Front Panel
1038.6002.02 2.3 E-13
2.1.1.2 Controls
(cf. Fig. 2-1, B front panel view, controls)
2 DATA INPUT
Parameter field
FREQ
LEVEL
SAVE
RCL
Parameters RF frequency and RF level can be entered
directly by means of the parameter keys, alternatively
to menu operation. Further, complete instrument
settings can be stored and called.
FREQ Opens the setting of the RF frequency via
value input or variation by means of a rotary
knob. The current menu is maintained.
Return to the menu by means of the
[
RETURN
]
key. (Setting of the RF frequency
also in the FREQUENCY menu).
LEVEL Opens the setting of the RF level via value
input or variation by means of a rotary knob.
The current menu is maintained. Return to
the menu by means of the
[
RETURN
]
key.
(Setting of the RF level also in the LEVEL
menu).
SAVE Opens the storing of the current instrument
setting. Memory selection is effected by
entering a number (1 to 50) and is finished by
means of the
[
ENTER
]
key.
RCL Opens the calling of an instrument setting
stored. Memory selection is effected by
entering a number (1 to 50) and is finished by
means of the
[
ENTER
]
key.
see as well
Section 2.2.2.5,
Use of
[
FREQ
]
and
[
LEVEL
]
Keys
Section 2.4,
RF Frequency
Section 2.5,
RF Level
Section 2.2.5,
Storing and Calling of
Instrument Settings
Numeric input field
8
9
7
5
6
4
231
.
-
0
Ï
Numeric values, decimal point and minus sign can be
entered by means of the digital keys.,
0...9 Enters the digit.
ì
Enters the decimal point
-/
←
Enters the minus sign.
Deletes the last input (digit, sign or decimal
point) - key [BACKSPACE].
see as well
Section 2.2.2,
Basic Operating Steps
To Next Page
Loading...
