1039.1856.12-13 B E-7
Supplement B
to Operating Manual
SIGNAL GENERATOR
SME
Correction of Data Sheet, Number 757.0358.23
Models SME03 and SME03E
Amplitude modulation:
AM distortion factor at 1 kHz
1)
Applies to levels
≤
7dBm
Model SME06
Instead of the values quoted in the data sheet, the following specifications of the SME06 apply:
Amplitude modulation:
Modulation frequency response (m = 60 %)
1)
20 Hz (DC) to 50 kHz............................................ < 1 dB (f
≤
3GHz)
20 Hz (DC) to 10 kHz............................................ < 1 dB (f > 3GHz)
Model SME03A and SME models fitted with option SM-B50
Model SME03A and SMExx models fitted with Option SM-B50 are equipped with a high-speed
processor which improves the values specified for the setting times. The following specifications are
valid:
Frequency
Setting time (to within
<1x10
-7
for f >130 MHz and
<73 Hz für f <130 MHz)
after IEC/IEEE-bus delimiter.......................................... <3 ms
Level
Setting time (IEC/IEEE bus)
with electronic level setting ............................................ <2 ms
Sweep
Selectable step time......................................................... 2 ms to 5 s
List mode
Max. number of channels ................................................ 4000
1
)
Does not apply to non-interrupting level setting (ATTENUATOR MODE FIXED)
To Next Page
Loading...
