List Editor SME
1038.6002.02 E-13
2.26
Subsequently to the above setting, 420 MHz as new RF frequency and 12.5 kHz as the step width for
the RF frequency variation are set in the following. Parameter quick select is used, which reduces the
number of operating steps.
Operating steps Explanations
RETURN
RETURN
Reset the menu cursor to the main
menu in 2 steps.
.
FREQUENCY
.
MENU / VARIATION
SELECT
MENU / VARIATION
Select FREQUENCY menu.
The frequency setting menu is
displayed.
.
FREQUENCY
.
MENU / VARIATION
Select FREQUENCY parameter.
The menu cursor marks the setting
value.
4
DATA INPUT
2
0
M
µ
Enter frequency 420 MHz and
acknowledge.
.
KNOB STEP USER
.
MENU / VARIATION
Set menu cursor to the setting value
of parameter KNOB STEP USER.
1
DATA INPUT
2
.
k
m
5
Enter step width 12.5 kHz.
.
KNOB STEP
.
MENU / VARIATION
Set menu cursor to parameter KNOB
STEP
To Next Page
Loading...
