44 / 280
1. Introduction
1.1. Preface
You have chosen an ST 410/ST 411 controller, a high-quality product for your kiln. This controller series incorporates the
latest technological features, is being continuously developed and is the leader in its class.
After reading this instruction manual, you will be familiar with the functionality of the ST 410/ST 411 controller.
Please make sure that you fully understand the kiln manufacturer’s safety instructions.
Make sure that the control unit is mounted at a safe distance from the kiln and is not exposed to direct heat from the kiln.
Do not place the control unit on top of the kiln.
The images shown in this instruction manual illustrate the functions and may differ in some ways from the actual product.
1.2. Contact
1.3. Scope of delivery
ST 410 or ST 411 control unit Type varies depending on the version
Control unit bracket For attachment to the kiln or wall
Mounting material for bracket For attachment to the kiln or wall
USB flash drive Data transfer of recorded measured values
Instruction Manual
To Next Page
Loading...
