Roland MV-8800

M-127
MV-8800 Owner’s Manual
7
Editing a sample
Converting a stereo sample to monaural (Set mono)
You can now convert a stereo sample to monaural.
1.
Access the SAMPLE MANAGER screen as described in “Viewing a list of samples” (p. 121).
2. Press [F5](Command).
The SELECT SAMPLE EDIT COMMAND popup (Screen Guide; p. 132) will appear.
3.
Select “Set Mono” and press [F5](Select).
The SET MONO popup (Screen Guide; p. 137) appear.
fig.audio-event-param.eps
4.
Set the Replace parameter.
If this is on ( ✔ ), the edited result will overwrite the original sample.
5.
Press [F5](Execute).
The selected sample will be converted to monaural.
● You can select Set Mono from the command in the AUDIO PHRASE EDIT screen (Screen Guide; p. 155) or
the SAMPLE EDIT screen (Screen Guide; p. 128).
MV-8800_e.book 127 ページ ２００６年１１月１０日 金曜日 午後１時４８分