Managing projects
M-238
MV-8800 Owner’s Manual
Here’s how to save the current project to the hard disk.
1.
Press [PROJECT].
The PROJECT MENU screen (Screen Guide; p. 162) will appear.
2.
With the cursor located in the upper row of icons, press [F4](Save). Alternatively, select the
SAVE PROJ icon and press [ENTER].
A message of “Save current project?” will appear.
If the current project is protected, you’ll be presented with the message “Current Project is protected. Save as
new Project?” when you press [F5](Yes) in step 2.
If you press [F5](Yes), the SAVE AS NEW PROJECT popup (Screen Guide; p. 165) will appear, allowing you
to save the current project under a different name.
Here’s how you can save the current project to disk under a different name. This is convenient when you want
to create several different arrangements of a project for comparison.
1.
Press [PROJECT].
The PROJECT MENU screen (Screen Guide; p. 162) will appear.
2.
With the cursor located in the upper row of icons, press [F5](Save As). Alternatively, you
can directly select the SAVE AS NEW PROJ icon and press [ENTER].
The SAVE AS NEW PROJECT popup (Screen Guide; p. 165) will appear.
Input a name for the new project you want to create.
3.
When you have finished inputting a name, press [F5](OK).
The current project will be saved on the hard disk with the new project name you’ve specified.
Saving a project
●
While the project is being saved, the DISK indicator (red) will light. Never strike the pads or otherwise
subject the MV-8800 to vibration during this time. Doing so will cause malfunctions.
●
The length of time required to save a project is proportionate to the size of the project.
●
You can also save the current project by pressing [SHIFT] + [SHUTDOWN].
F-button
Action
[F1](No)
Cancels the Save operation.
[F5](Yes) Saves the current project.
Saving a project with a different name
●
While the project is being saved, the DISK indicator (red) will light. Never strike the pads or otherwise
subject the MV-8800 to vibration during this time. Doing so will cause malfunctions.
●
The length of time required to save a project is proportionate to the size of the project.
MV-8800_e.book 238 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
