Roland MV-8800

M-73
MV-8800 Owner’s Manual
2
Importing data
Loading sound libraries of other model
You can load sound library data that was created for a model other than the MV-8800.
When you load a Roland S-700 series patch file, or an AKAI MPC series or S-series program file, its structure
will be re-created on the MV-8800.
This lets you create a patch without having to make assignments to the velocity pads.
1.
Using the same procedure as described up to step 4 of “Importing the WAV or AIFF files”
(p. 65), select the sound library (patch or program) that you want to import.
2.
Press [F5](Import).
The ASSIGN TO PART / LIBRARY popup (Screen Guide; p. 224) will appear.
• Part
If the To parameter is set to “Part,” specifies the part in which the new patch will be created.
Range: Off, 1–16
• Library
If the To parameter is set to “Library,” specifies the library number in which the new patch will be created.
Range: Off, 1–128
• F-buttons
3.
Press [F5](Execute).
The patch will be imported into the specified part and library.
Format
Filename extension
Roland S-700 series patch file
-
Akai MPC2000/2000XL program file .PGM
Akai S1000 program file .A1P
Akai S3000 program file .A3P
Akai MPC2000/2000XL sound file .SND
Akai S1000 sound file .A1S
Akai S3000 sound file .A3S
● Some imported data may not be reproduced correctly.
● To create a patch using the types of data listed in the gray portion of the table, refer to “Importing the WAV or
AIFF files” (p. 65).
● If you want to import into only one of these (part only or library only), turn the other setting Off.
F-buttons
Explanation
[F3](With Delete)
Deletes the samples used by the specified part or library patch (Delete Patch), and then import
the data.
[F5](Execute) Imports the patch to the specified location.
● You cannot create a patch simply by loading Akai MPC2000/2000XL program files (.PGM) alone. The sound
files (.SND or .WAV) must also be present in the same folder as the program file.
● The data on an Akai MPC2000/2000XL or S1000/S3000 CD-ROM is organized into proprietary units called
“partitions.” On the MV-8800, these will appear as folders named PARTITION A, PARTITION B, and so on.
● When Akai MPC2000/2000XL or S1000/S3000 program files or sound files are converted, the category name
will be “AK” and the patch name will be the first twelve characters of the program file name.
MV-8800_e.book 73 ページ ２００６年１１月１０日 金曜日 午後１時４８分