Roland MV-8800

M-92
MV-8800 Owner’s Manual
Limit the performance data received by a part
Of the MIDI messages received by each part, you can specify the messages for which reception will be
enabled.
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Press [F2](MIDI Filter).
The MIDI FILTER screen (Screen Guide; p. 116) will appear.
3.
Use CURSOR [ ] [ ] [ ] [ ] to move the cursor to the parameter you want to adjust.
4.
Turn the VALUE dial or use [DEC] [INC] to edit the value.
● For details on the parameters, refer to “MIDI FILTER screen” (Screen Guide; p. 116).
MV-8800_e.book 92 ページ ２００６年１１月１０日 金曜日 午後１時４８分