M-252
MV-8800 Owner’s Manual
Using a mouse
You can use the included mouse to operate the on-screen knobs and buttons, or the sequence data in the play
list. When you move the mouse, the mouse pointer (the arrow symbol) will move in the screen. By placing the
mouse pointer on a button or knob and pressing (clicking) the mouse button you can perform various
operations depending on the selected item.
The included mouse is a wheel mouse.
Basic mouse operations are:
•
Use the mouse pointer to indicate a button or knob in the screen (“point”)
•
Press the mouse button (“click”)
•
Turn the mouse wheel
●
Point
Move the tip of the mouse pointer to a button or knob shown in the screen. This is called
“pointing” at the button or knob.
●
Click
Point to a button or knob in the screen; then press and release the mouse button
once.
In some cases you will be specifically told to “right-click,” which means to click using
the right mouse button.
●
Double-click
Point to an on-screen button or knob, and rapidly press the mouse button twice.
●
Mouse operations can be used only in the external display.
About the mouse
●
The included mouse is an optical mouse. It may not function correctly on some surfaces, so be sure to use it on
the included mouse pad.
Basic operation
Wheel
Right-button
Left-button
MV-8800_e.book 252 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
