About V-LINK
M-311
MV-8800 Owner’s Manual
20
Chapter 20
About V-LINK
What is V-LINK?
V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to
connect two or more V-LINK compatible devices, you can easily enjoy performing a wide range of visual
effects that are linked to the expressive elements of a music performance.
●
For example...
If you use the MV-8800 with an Edirol PR-50 and MD-P1, you can
•
Use the MV-8800 to remotely make performance settings on the Edirol PR-50 and MD-P1.
•
Use the MV-8800’s sequencer to create synchronized music and video performances.
•
Use the MV-8800’s pads to switch images (clips/palettes).
•
Use the MV-8800’s sliders to control the brightness or color of the images.
When the MV-8800 is used together with the Roland Fantom-X
•
You can use the Roland Fantom-X’s sequencer to enjoy synchronized performance of music and
images.
•
You can switch the MV-8800’s images (Pix Jam) from the Roland Fantom-X.
The MV-8800 supports two types of V-LINK functionality: “V-LINK master functionality,” in which the MV-8800
controls an external V-LINK device, and “V-LINK slave” functionality, in which an external V-LINK device
controls the MV-8800.
●
In order to use the MV-8800 with the Edirol PR-50 via V-LINK, you will need an Edirol UM-1EX (sold separately)
for connections.
●
If you use the MV-8800 with the Edirol MD-P1, you can control section A of MD-P1.
The MV-8800’s V-LINK functionality
MV-8800_e.book 311 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
