Roland MV-8800

Editing events individually
M-185
MV-8800 Owner’s Manual
Editing a song / pattern
10
Here you can adjust the parameter of an audio event in an audio track.
1.
Access the SONG screen (Screen Guide; p. 8) or the PATTERN screen (Screen Guide; p. 91).
2.
Press [F5](Seq Edit).
The SEQUENCE EDIT screen (Screen Guide; p. 31) will appear.
3.
Use CURSOR [ ] [ ] to select the audio track which has audio events.
4.
USE [JUMP] + MEAS [ ] [ ] to move the time location of the audio event you want to
edit.
5.
Press [MENU].
The MENU popup will appear.
6. Select “Audio Event Parameter” and press [F5].
The AUDIO EVENT PARAMETER popup (Screen Guide; p. 28) will appear.
7.
Use CURSOR [ ] [ ] to select the parameter.
8.
Use the VALUE dial or [DEC] [INC] to edit the value.
9.
Press [F5](Close).
Audio event parameter
● If you press [F1](Move), the MOVE AUDIO EVENT popup (Screen Guide; p. 113) will appear. Here you can
change the length of an audio event, or move it to a different time location.
● If you press [F2](Sample Edit), the AUDIO EVENT SAMPLE EDIT popup (Screen Guide; p. 29) will appear.
Here you can change the playback region of the sample used by an audio event.
MV-8800_e.book 185 ページ ２００６年１１月１０日 金曜日 午後１時４８分