Roland MV-8800

M-89
MV-8800 Owner’s Manual
4
Making Instrument settings
Chapter 4
Making Instrument settings
An instrument has sixteen parts, and you can assign a patch to each part.
Assigning the patch to a part
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Use CURSOR [ ] [ ] to select the part to which you want to assign a patch.
The selected part number (the current part) is highlighted.
3.
Press [F4](Library).
The PATCH LIBRARY popup (Screen Guide; p. 117) will appear.
4.
Move the cursor to the desired patch.
5.
Press [F5](Use This).
The specified patch will be loaded.
● “Patch” (p. 52)
● Alternatively, you can access the PATCH LIBRARY popup by moving the cursor to the Patch column and
turning the VALUE dial or using [DEC] [INC].
MV-8800_e.book 89 ページ ２００６年１１月１０日 金曜日 午後１時４８分