Importing the WAV or AIFF files
M-67
MV-8800 Owner’s Manual
Importing data
2
If you press [MENU] then select “Importing the WAV or AIFF files” (p. 65) in step 4, the IMPORT OPTIONS
popup will appear.
•
Auto Divide
The Auto Divide function detects regions of silence during sampling, and divides the sample into several
samples at these points.
•
Gap Time
When Auto Divide is On, this parameter specifies the length of the silent regions that will be detected.
Range: 0.5, 1.0, 1.5, 2.0 sec
•
Pre Emphasis
Specify whether emphasis processing will be applied when you import a music data file.
Options when importing
Value
Explanation
Off
The waveform will be imported without being divided.
On The waveform will be divided at regions of silence.
●
If you are importing multiple files, the Auto Divide settings are not used.
●
A maximum of 96 samples can be divided.
Value
Explanation
Off
Emphasis processing will not be applied to the imported data.
On Emphasis processing will be applied to the imported data.
●
The amount of time required to execute the emphasis.
●
The high frequency range of the inputted sample will be boosted when Pre Emphasis is On.
MV-8800_e.book 67 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
