M-142
MV-8800 Owner’s Manual
Using markers
1.
Move to the time location where you want to assign a marker point.
2.
Hold down [SHIFT] and press [BMP/TAP].
The new marker is placed at the current time.
1.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
2.
Press [MENU].
The MENU popup will appear.
3.
Select “Marker” and press [F5](Select)
The MARKER popup (Screen Guide; p. 57) will appear.
4.
Use the CURSOR [ ] [ ] to move the cursor to the marker number(01-99) that you want to
move.
5.
Press [F5](Jump).
You will move to the time location of the marker at which the cursor is located.
To jump to the next marker in the song after the current time, hold down [JUMP] and press STEP [ ].
To jump to the last marker in the song before the current time, hold down [JUMP] and press STEP [ ].
1.
Press [SONG].
The SONG screen (Screen Guide; p. 8) will appear.
2.
Press [MENU].
The MENU popup will appear.
3.
Select “Marker” and press [F5](Select)
The MARKER popup (Screen Guide; p. 57) will appear.
4.
Use the CURSOR [ ] [ ] to move the cursor to the marker number(01-99) that you want to
delete.
5.
Press [F3](Delete).
The marker at the cursor location will be deleted.
Setting a marker point
Moving to a marker point
Moving to the next (previous) marker
Deleting a marker point
MV-8800_e.book 142 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
