M-201
MV-8800 Owner’s Manual
Editing a song / pattern
10
Restricting the type of events that will be edited (View Filter)
If there is a large amount of performance data, numerous events will be displayed, possibly making it difficult
to edit. In such cases, you can use the View Filter to restrict the types of events that will be displayed, letting
you edit only the events that are displayed.
1.
In either the SONG screen, PATTERN screen, or SEQUENCE EDIT screen, press [MENU].
The MENU popup will appear.
2.
Select “View Filter” and press [F5](Select).
The VIEW FILTER popup (Screen Guide; p. 53) will appear.
3.
Either turn the VALUE dial or press [F3](On/Off) to add a check mark
✔
to the events you
want to view (and edit).
Events with a check mark (
✔
) will be displayed; events without a check mark will not be displayed.
Pressing [F1](All On) will add a check mark to all events, and pressing [F1](All Off) will remove the check mark
from all events.
4.
Press [EXIT].
The VIEW FILTER popup will close.
The icon shown in the lower right of the SONG screen, PATTERN screen, or SEQUENCE EDIT screen
indicates the View Filter status you specified.
Message and icon
Explanation
Note
Note messages; MIDI messages that indicate a note.
Poly Aftertouch
Polyphonic Aftertouch messages; MIDI messages that apply aftertouch to individual
keys.
Control Change
Control Change messages; MIDI messages that apply various effects such as
modulation or expression.
Program Change
Program Change messages; MIDI messages that select sounds.
Channel Aftertouch
Channel Aftertouch messages; MIDI messages that apply aftertouch to an entire MIDI
channel.
Pitch Bend
Pitch Bend messages; MIDI messages that change the pitch.
Tune Request
This MIDI message causes an analog synthesizer to tune itself.
Mode Message
MIDI Mode Message that changes the mode
System Exclusive
System Exclusive messages; MIDI messages that contain settings specific to the
MV-8800 itself, such as sound settings.
Audio Event
Audio events (performance data of audio phrases, or audio data directly recorded) on
audio tracks.
They are displayed on the SONG screen, PATTERN screen and SEQUENCE EDIT
screen.
●
For details on all of the View Filter parameters and settings, refer to ”VIEW FILTER popup” (Screen Guide;
p. 53).
Icon
Explanation
View Filter is off (events displayed)
View Filter is on (events not displayed)
MV-8800_e.book 201 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
