M-134
MV-8800 Owner’s Manual
Playing only a specific track (Solo)
If you want to hear only the performance of a specific instrument while the song plays, you can Solo the track
that contains that performance.
1.
Access the SONG screen (Screen Guide; p. 8) or the PATTERN screen (Screen Guide; p. 91).
2.
Use CURSOR [ ] [ ] to select the track you want to Solo.
The selected track becomes the current track. (the name of the current track is highlighted.)
3.
Use CURSOR [ ] [ ] to move the cursor to the “S” column.
“S” is the Solo switch; it controls the Solo function of the track.
4.
Turn the VALUE dial toward the right or press [INC].
“S” will be displayed at the cursor location of the current track. Solo is now on.
●
If you turn both Mute and Solo on for the same track, Solo will take priority.
●
To defeat Solo, turn the VALUE dial toward the left or press [DEC] to switch the “S” indicator to “-”.
MV-8800_e.book 134 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
