M-136
MV-8800 Owner’s Manual
Applying quantization during playback (Play Quantize)
You can apply quantization during playback to a recorded data without modifying.
1.
Access the SONG screen (Screen Guide; p. 8) or the PATTERN screen (Screen Guide; p. 91).
2.
Use CURSOR [ ] [ ] to select the MIDI track you want to add play quantize.
The selected track becomes the current track (the name of the current track is highlighted).
3.
Press [F2](Track Param).
The TRACK PARAMETER popup (Screen Guide; p. 11) for the MIDI track will appear.
4.
Make settings for the Play Quantize parameters.
The playback quantization will change. Adjust the parameters while the song / pattern plays, and listen to how
Play Quantize affects the playback.
●
The Play Quantize parameters are the same as the Edit Quantize parameters. For details, refer to “Correcting
the timing of performance data (Quantize)” (p. 191).
● The difference between Input Quantize and Play Quantize
• Input Quantize
This applies quantization to the incoming data during realtime recording, and records
the quantized data.
• Play Quantize
This applies quantization to the playback of the song / pattern. This means that it will
not modify the original data. You can adjust the quantize settings at any time to
produce a different-feeling quantization effect.
MV-8800_e.book 136 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
