M-39
MV-8800 Owner’s Manual
Quick Start
Quick Start
Listening to the demo songs
The MV-8800 comes equipped with a wide variety of features for creating songs. To get a better idea of what
these functions are, try listening to the demo songs.
A project containing a demo song was saved to the MV-8800’s internal hard disk when the unit was shipped
from the factory. Use the following procedure to load the project containing the demo song to the MV-8800’s
memory.
1
Press [PROJECT].
The PROJECT MENU screen (Screen Guide; p. 162) will appear.
2
Use CURSOR [ ] [ ] [ ] [ ] to select the LOAD PROJ icon, and
press [ENTER].
The LOAD PROJECT screen (Screen Guide; p. 164) will appear.
The project saved on the hard disk are listed in the display.
3
Move the cursor to the project that you want to load, and press
[F5](Execute).
The display will ask “Save Current Project before loading project?”
4
Press [F5](Yes) or [F1](No).
The project is loaded to the MV-8800’s memory.
Loading a project
F-button
Action
[F1](No)
The selected project will be loaded without saving the current project.
[F5](Yes) The current project will be saved, and then the selected project will be loaded.
MV-8800_e.book 39 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
