M-32
MV-8800 Owner’s Manual
Basic operations
Each screen displays various parameters (items to set) or menus (items to select). To edit the value of a
parameter, move the cursor to the value you want to edit. To select a menu item, move the cursor to the
desired item. The cursor is enclosed in a frame as shown below.
Use CURSOR [ ] [ ] [ ] [ ] to move the cursor.
●
Finalizing a menu selection
Press [ENTER] to finalize the selected menu item. The selection or command (operation) will be executed.
To edit the value of a parameter, use the VALUE dial or [DEC] [INC].
●
VALUE dial
Turn the VALUE dial toward the right to increase the value, or
toward the left to decrease it.
You can hold down [SHIFT] and use the VALUE dial to change a
value in larger steps.
●
[DEC] / [INC]
Press [INC] to increase a value. Press [DEC] to decrease a value.
You can continue holding down [DEC] or [INC] to make the value continue changing (“repeat”). At this time,
you can hold down the other button as well to make the value change even faster (“turbo repeat”). You can
hold down [SHIFT] and use [INC] [DEC] to change a value in larger steps.
The top panel F-buttons ([F1]–[F5]) have various functions assigned to them depending on the screen shown.
These buttons correspond one-to-one with the function names shown at the bottom of the screen.
Moving the cursor
Editing the value of a parameter
Using the F (function) buttons
Cursor
Cursor (highlighted)
Black characters
on white background
(value display)
decrease increase
MV-8800_e.book 32 ページ ２００６年１１月１０日 金曜日 午後１時４８分
To Next Page
Loading...
