Roland MV-8800

List of available editing commands
M-189
MV-8800 Owner’s Manual
Editing a song / pattern
10
Here’s how you can copy the specified region of performance data. This is a convenient way to repeat a phrase
several times. You can choose from two copy methods; Copy & Paste or Copy & Insert.
● Copying data and pasting it at another location (Copy & Paste).
The Copy & Paste command pastes the copied performance data into another track or note number. Data
already existing at the paste location will be overwritten.
❍ Parameters to specify
• To
Specify the new time to which the data will be pasted.
• Transpose
Move the pitch of the note messages upward or downward.
• To Track
Specify the track to which the data will be copied. If you’re copying more than one track, this parameter is
invalid.
• Mode
Specify what will happen if performance data exists at the copy-destination.
• Times
Specify the number of times that the data will be pasted.
● For details on all of the parameters and settings for Copy & Paste, refer to “COPY&PASTE popup” (Screen
Guide; p. 35).
● The Transpose parameter is available if you accessed the COPY & PASTE popup from the PIANO ROLL EDIT
screen.
● The To Track parameter is available if you accessed the COPY & PASTE popup from the SEQUENCE EDIT
screen.
Setting
Explanation
Mix
The data will be merged (combined) with the data existing at the paste destination.
Replace The data will replace (overwrite) the data existing at the paste destination.
● If the track(s) being copied include audio tracks or pattern tracks, the Mode parameter is fixed at Replace.
Copying performance data
MV-8800_e.book 189 ページ ２００６年１１月１０日 金曜日 午後１時４８分